concrete cutting saw,
concrete saw brisbane,
concrete saw sydney
Choose Your Equipment Wisely for Precise Concrete Cutting
3:51 AM
Concrete cuts should be clean and efficient and for that, you need to choose the right equipment and accessories. Apart from proper and precise execution, you need to have immaculate planning and a strategic process to follow. You will need to prepare well and consider all the factors that would result in an imperfect job. Remember, quality cuts are important and there is seldom any scope for errors in concrete cutting.
 |
Concrete-Cutting
|
Choosing your saw
A concrete cutting saw is essential for this purpose and you will need to choose wisely as every concrete cutting saw is created differently depending upon its needs. Therefore, specific jobs will warrant for specific types of saw and careful evaluation of the requirements along with the environment is therefore of infinite importance. The type of saws you can choose from includes:
- Wet saws offer better control and containment of dust and require little after-job cleaning. These saws are ideal for making straighter cuts at a comparatively smaller area.
- Diamond blades and bits are the best for sharpest and cleanest cuts and are extensively used for intricate and detailed jobs.
- Handheld cutting edge saws are suitable for flush cutting and live up to their name for concrete cutting in tight corners and can even is carried out on an embedded rebar.
- Finally, the walk-behind saws are best suited for cutting a whole slab or wall.
The Process to Follow
To make the best cut and also to prevent your concrete cutting saw from being damaged you will be required to follow the right processes as well.
These processes include:
- Whether it is for repairing or renovating and resizing the kitchen slabs, reshaping driveways and making holes in the walls you should mark the spot with chalk before making a cut.
- Fit the saw with a diamond or any abrasive blade and set it at the right depth. Most of the concrete slabs will fall under 2 to 6 inches thickness and therefore the depth should be adjusted according to the direction.
- Start to make the cuts from the edge slowly and follow the chalk line. Make sure that you proceed slowly with minimal RPM. This will not only keep the saw in line and ensure perfection but will also prevent it from heating up excessively and quickly. It will also prevent the shrapnel from tossing in the air.
- Pour water occasionally to cool down the blades. This will also reduce dust during the concrete cutting process.
- Use jackhammer to remove the extra concrete if the saw cannot cut a thicker slab or use a heavy duty concrete saw.
- Use an electric cut off tool to chip off edges if you need clean corners. For the rest of the concrete, you can use a small pneumatic chisel to remove.
Check Your Blades
The blades of the concrete cutting saw are the most significant component that you should check well. As you may know, different types of saws may use different kinds of blades and therefore will have its advantages and work abilities. If you find that the blades are lacking, none of these saws will be useful.
 |
Concrete-Cutting
|
If a blade gets dull it may fracture the cut and will also put additional stress on the saw heating it up excessively in the process. Dull blades will also result in faster wear and tear of the saw no to forget the huge amount of dust that it will produce.
This will enable you to avoid switching blades frequently to prevent compromise in cut quality and also reduce your work time.
0 comments