The Phillips driver bits are, in essence, considered to be the most used screwdriver bit in Australia. To begin with, they are durable, affordable, and have been purposely designed to stall out the screw while tightening. However, before you buy the driver bits of Phillips, you will need to have proper know-how about them. Hopefully, this write-up will help you out in this aspect.

What is Phillips Screwdriver Bits?

Unlike the other screwdriver bits, the Phillips driver bits come with a star-shaped recess on its head section. It, in turn, makes it easier for you to “cam out” before over-tightening the screws. Moreover, with them, you also would not need to use too much of your force while working.

The driver bits of Phillips can be identified with the cross-tipped shape, which is quite familiar among the models. They are used for tightening screws.

Phillips Driver Bits’ Sizes

The Phillips driver bits usually comes with seven different size options, which are - #000, #00, #0, #1, #2, #3, and #4. Among them, the #2 model tends to be much more famous than others. 

Phillips Screwdriver Bits - Operating Tips

If you are using the Phillips driver bits for the first time in your life, then you will need to be cautious while working. Otherwise, you might damage your hands or the head of the screw itself. Here are some tips that can help you out in this aspect.

• While working, you should always try to grip the driver properly. Be sure to avoid using too much pressure on the screw. Otherwise, it might slip off and strip off the head section of the screw.
• If you do not like working manually, then make sure to use a driver-based power tool of Phillips, like a cordless screwdriver. They are much easier to use and you can also pre-select the depth of driving before you can even start working.
• To apply the right amount of pressure on the screw-head, make sure to keep the bit in-line. It might seem a bit difficult at first, but you will get used to it gradually.
• Make sure to wear protective gear, such as a pair of gloves, before you do start working on your project. Otherwise, you might injure yourself.

Phillips Screwdriver Bits – Where Can You Use it?

Mostly, the Phillips driver bits are used for tightening the screws of automobiles. However, if you are skilled and capable, then you can use it in some other aspects as well. The following are a few of them.

• It can be used for opening the cabinet of your CPU. However, before working on it, be sure to check if the size of the head of the driver and screw match with each other. Besides, you can use it on other electrical modules, such as light switches, power outlets, and cover plates as well.
• With it, you can also change the air filter as well as the hose of your car. You might also use it to open up various furniture fixtures like dresser knobs and cabinets. In this aspect, you might need to opt for the #2 Phillips driver bits. However, before choosing the number, you should always make sure to check out the size of the screw too.

Conclusion

Just like any other driver bits, using the models of Phillips can seem to be a little bit difficult for beginners. Moreover, if you are inexperienced, then you might hurt yourself while working as well. Thus, you should always wear gloves and other protective items, especially when you are doing an intricate task, like fixing a furnishing.